ISSN 0892-6298
Vol. 24, Issue 1-2, 2007June 30, 2007 CDT
Performance of an Airfed Loose-fitting Helmet and Visor Respiratory Protective Device Worn During a Simulated Printing Works Activity
Performance of an Airfed Loose-fitting Helmet and Visor Respiratory Protective Device Worn During a Simulated Printing Works Activity
Articles in Vol. 24, Issue 1-2, 2007
Vol. 24, Issue 1-2, 2007
- The Effect of Sampling Probes on Measured Protection Factors in Military Gas MasksIlse L. Tuinman*Tineke J. AlbersLeon F.G. Geers
- Performance of an Airfed Loose-fitting Helmet and Visor Respiratory Protective Device Worn During a Simulated Printing Works ActivityShirley Frost*Rhiannon Mogridge
- Performance of an N95 Filtering Facepiece Respirator in a Grinding OperationLarry Janssen*Jeanne BidwellNicole McCulloughThomas J. Nelson
- Respirator Cartridge Breakthrough Testing of Substituted Silanes and SiloxanesGary O. Nelson*Michael StrongScott Hoag
- Laboratory Performance Testing of Powered Air Purifying RespiratorsBrian Harrison*Chantal HarrisonSeptimus LiangSimon SmithLisa Croll
- Nanoparticle Penetration Through NIOSH-approved N95 Filtering-facepiece RespiratorsSamy Rengasamy*Russel VerbofskyWilliam P. KingRonald E. Shaffer
Frost*, S., & Mogridge, R. (2007). Performance of an Airfed Loose-fitting Helmet and Visor Respiratory Protective Device Worn during a Simulated Printing Works Activity. Journal of the International Society for Respiratory Protection, 24(1–2), 9–20. https://doi.org/10.66828/001c.167227